HPE Ethernet 10Gb 2P 530T Adapter-656596-B21

Brand Visipax
Hardware Interface Ethernet
Item Dimensions LxWxH 1 x 1 x 1 inches
Data Link Protocol Ethernet
Item Weight 2 Pounds


About this item

  • Are you looking to reduce network congestion and improve cable management at the servers in your HP ProLiant Gen8 environment?The HP Ethernet 10Gb 2-port 530T Adapter is a dual-port 10GBASE-
  • Available

    15-20 weeks


Buy Now Compare
Availability: In Stock

Product description


The HPE Ethernet 10Gb 2-port 530T Adapter is a dual-port 10GBASE-T adapter, featuring the 57810S 10 GbE solution from QLogic in a PCIe 2.0 compliant form factor designed for HPE ProLiant servers. The HPE 530T Adapter delivers full line-rate performance across all ports with low power consumption, utilizing CAT 6A UTP cabling with distances up to 100 meters

Product features

Key features
  • Hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE)

  • Industry-Leading throughput and latency performance

  • Up to 40 Gb/s bi-directional near-line rate throughput

  • 10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling

  • Improved small packet performance

  • Low profile design shipping with standard height and low-profile brackets

  • On chip temperature monitor

  • Operates at 1 Gb/s/10 Gb/s, auto-negotiation, on both ports

  • Support for Preboot eXecution Environment (PXE)

  • Optimized for virtual server environments with support for Network Partitioning (NPAR) and Single-Root I/O Virtualization (SR-IOV)

  • Active health systems support

  • Field replaceable and upgradeable

  • PXE, Jumbo Frames, Checksum and Segmentation Offload, IPv6 and RSS

  • IEEE 1588 (Time synchronization) ready

Throughput-Theoretical bandwidth
This adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing the network performance needed to improve response times and alleviate bottlenecks
802.1Q VLANs
  • IEEE 802.1Q Virtual Local Area Network (VLAN) protocol allows each physical port of this adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance

  • VLANs increase security by isolating traffic between users

  • Limiting the broadcast traffic to within the same VLAN domain also improves performance

Checksum and segmentation offload
  • Normally the TCP Checksum is computed by the protocol stack. Segmentation offload is technique for increasing outbound throughput of high-bandwidth network connections by reducing CPU overhead

  • The technique is also called TCP Segmentation Offload (TSO) when applied to TCP, or Generic Segmentation Offload(GSO)

Configuration utilities
  • This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable initial diagnostics and configure adapter teaming

  • This includes a patented teaming GUI for Microsoft Windows operating systems

  • Additionally, support for scripted installations of teams in a Microsoft Windows environment allow for unattended OS installations

Data Plane Development Kit (DPDK)
This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments
HPE Sea of sensors3D
  • Support for the HPE Sea of Sensors which is a collection of 32 sensors that automatically track thermal activity -heat – across the server

  • When temperatures get too high, sensors can initiate fans and make other adjustments to reduce energy usage

  • A significant improvement lies in the ability to apply fan speed increases only to the portion of the system that is rising in temperature, rather than all six fans in unison, which reduces the amount of energy used for cooling

IPv6 uses 128-bit addressing allowing for more devices and users on the internet. IPv4 supported 32-bitaddressing
Jumbo frames
  • This adapter supports Jumbo Frames (also known as extended frames), permitting up to a 9,000 byte (KB)transmission unit (MTU) when running Ethernet I/O traffic

  • This is over five times the size of a standard 1500-byte Ethernet frame

  • With Jumbo Frames, networks can achieve higher throughput performance and greater CPU utilization

  • These attributes are particularly useful for database transfer and tape backup operations

Message Signaled Interrupt (Extended)(MSI-X)
MSI-X (Extended) provides performance benefits for multi-core servers by load balancing interrupts between CPUs/cores
Network adapter teaming
This adapter support for NIC teaming helps IT administrators increase network fault tolerance and increased network bandwidth, the team of adapters can work together as a single virtual adapter, providing support for several different types of teaming enabling IT administrators to optimize availability, improve performance and help reduce costs
Network Partitioning (NPAR)
  • This adapter supports NPAR allowing administrators to configure a 10Gb port as four separate partitions or physical functions

  • Each PCI function is associated with a different virtual NIC

  • To the OS and the network, each physical function appears as a separate NIC port

Optimized for virtualization
I/O Virtualization support for VMware NetQueue and Microsoft VMQ helps meet the performance demands of consolidated virtual workloads
  • Support for PXE enables automatic deployment of computing resources remotely from anywhere. It allows a new or existing server to boot over the network and download software, including the operating system, from a management/ deployment server at another location on the network

  • Additionally, PXE enables decentralized software distribution and remote troubleshooting and repairs

Receive Side Scaling (RSS)
  • RSS resolves the single-processor bottleneck by allowing the receive side network load from a network adapter to be shared across multiple processors

  • RSS enables packet receive-processing to scale with the number of available processors

Server integration
  • This adapter is a validated, tested, and qualified solution that is optimized for HPE ProLiant servers

  • Hewlett Packard Enterprise validates a wide variety of major operating systems drivers with the full suite of web-based enterprise management utilities including HPE Intelligent Provisioning and HPE Systems Insight Manager that simplify network management

  • This approach provides a more robust and reliable networking solution than offerings from other vendors and provides users with a single point of contact for both their servers and their network adapters

Single-Root I/O virtualization (SR-IOV)
  • SR-IOV provides a mechanism to bypass the host system hypervisor in virtual environments providing near metal performance and server efficiency

  • SR-IOV provides mechanism to create multiple Virtual Functions (VFs) to share single PCIe resources

  • The device is capable of SR-IOV, and requires Server BIOS support, controller firmware, and OS support

For overall improved system response, this adapter supports standard TCP/IP offloading techniques including:
  • TCP/IP, UDP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter

  • Large send offload (LSO) or TCP Segmentation Offload (TSO) allows the TCP segmentation to be handled by the adapter rather than the CPU

Precision Time Protocol (IEEE 1588PTP)
Synchronization of system clocks throughout a network, achieving clock accuracy in the sub-microsecond range, making it suitable for measurement and control systems
TCP/IP Offload Engine (TOE) shifts the processing of data in the TCP protocol stack from the server CPU to the adapter’s processor, freeing server CPU cycles for other operations
Tunnel offload
  • Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN and NVGRE

  • By offloading packet processing to adapters, users can use overlay networking to increase VM migration flexibility and virtualized overlay networks with minimal impact to performance

  • HPE Tunnel offloading increases I/O throughput, reduces CPU utilization, and lowers power consumption

  • Tunnel offload supports VMware’s VXLAN and Microsoft’s NVGRE solutions

VMware NetQueue and Microsoft Virtual Machine Queue (VMQ)
  • VMware NetQueue is technology that significantly improves performance of 10 GbE network adapters in virtualized environments

  • Windows Hyper-V VMQ (VMQ) is a feature available on servers running Windows Server 2008 R2 with VMQ enabled Ethernet adapters

  • MQ uses hardware packet filtering to deliver packet data from an external virtual machine network directly to virtual machines, which reduces the overhead of routing packets and copying them from the management operating system to the virtual machine

Network management

LED Indicators
LED indicators show link integrity and network activity for easy troubleshooting
Management support
This adapter ships with agents that can be managed from HPE Systems Insight Manager or other management application that support SNMP

Supported server list

Supported Server
HPE ProLiant DL, ML and XL (Rack-Optimized)
  • HPE ProLiant DL20 Gen9 Server

  • HPE ProLiant DL60 Gen9 Server

  • HPE ProLiant DL120 Gen9 Server

  • HPE ProLiant DL160 Gen9 Server

  • HPE ProLiant DL180 Gen9 Server

  • HPE ProLiant DL360 Gen9 Server

  • HPE ProLiant DL360 Gen10 Server

  • HPE ProLiant DL380 Gen9 Server

  • HPE ProLiant DL380 Gen10 Server

  • HPE ProLiant DL560 Gen9 Server

  • HPE ProLiant DL580 Gen9 Server

  • HPE ProLiant ML30 Gen9 Server

  • HPE ProLiant ML350 Gen9 Server

  • HPE Apollo 2000 – XL1x0r Gen9 Server

  • HPE Apollo 4200 Gen9 Server

  • HPE Apollo 4500 XL450 Gen9 Server

  • HPE Apollo 6500 XL270d Gen9 Server HPE ProLiant

NOTE: This is a list of supported servers. Some may be discontinued

Software overview

Operating System support
  • Microsoft Windows Server 2008 (32/64), Enterprise, Standard, Datacenter, Web, Embedded, Foundation (SP2 and R2 w/SP1)

  • Microsoft Windows HPC Server 2008 (SP2 and R2 w/SP1)

  • Microsoft Windows Small Business Server 2011 (SBS V7) – Base

  • Microsoft Windows Small Business Server 2011 Essentials

  • Microsoft Windows Multipoint Server 2011

  • Microsoft Windows Server 2012

  • Hyper-V (R2 w/SP1)

  • RHEL 5.7/5.8/5.9 x86 and AMD 64 and EM 64T

  • RHEL 6.1/6.2/6.3 x86 and AMD 64 and EM 64T

  • SLES 10 SP4 x86 and AMD 64 and EM 64T

  • SLES 11 SP2 x86 and AMD 64 and EM 64T

  • Solaris 10/11

  • VMware vSphere 4.1 and 5.0

  • Citrix XenServer 6.0/6.1


There are no reviews yet.

Be the first to review “HPE Ethernet 10Gb 2P 530T Adapter-656596-B21”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Back to Top
Select your currency
AED United Arab Emirates dirham
Product has been added to your cart