6-port 10/100Mbps PoE Switch


The H1064PLS is a 10/100Mbps unmanaged PoE switch. It has 4*10/100M PoE ports and
2*10/100M RJ45 ports. Port 1-4 can support IEEE802.3af/at standard PoE. Single port PoE
power up to 30W, and the maximum POE output power is 65W. As a PoE power supply device, it
can automatically detect and recognize the power receiving equipment that meets the standard
and supply power through the network cable. It can supply power to POE terminal equipment
such as wireless AP, webcam, VoIP phone, video access control intercom, etc. through network
cable to meet the network environment that needs high-density PoE power supply. It is suitable
for hotels, campuses, factory quarters and small and medium-sized enterprises to form an
economy efficient network.
Unmanaged model, plug and play, no configuration, easy to use.


Minimum Qty 10.


Buy Now Compare
Availability: In Stock



 10/100Mbps access, Dual RJ45 port uplink
◇ Provides 4*10/100Base-TX RJ45 ports and 2*10/100Base-TX RJ45 ports for flexible
networking and meets the networking requirements of various scenarios.

◇ All ports support non-blocking wire-speed forwarding for smoother transmission.
◇ Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.

 Intelligent PoE power supply
◇ 6*10/100Base-TX RJ45 ports, meeting the needs of security monitoring, teleconferencing
system, wireless coverage, and other scenarios.
◇ IEEE802.3af/at PoE standard, without damaging non-PoE devices.
◇ Priority system for PoE port, it will supply power to the high priority level port first when the
power budget is insufficient and avoid overwork of the device.
 Innovative function
◇ Long distance file: When opening, the speed of port 1-4 is reduced to 10M. With the existing
twisted pair cable, the transmission limit of the twisted pair line can be broken, and the
transmission distance can reach 250 meters; on the other hand, It can solve the problem of
poor transmission caused by line aging.
◇ Video monitoring mode: Open with the long distance switch, port 1-4 are isolated from each
other but communicate with Port 5-6 to prevent DHCP conflicts, optimize port cache
utilization, and reduce broadcast storms.
 Stable and reliable, easy to use
◇ Plug and play, no configuration, simple and convenient.
◇ Low power consumption, galvanized steel casing, no fan.
◇ The user-friendly panel can show the device status through the LED indicator of PWR, L/A,
◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE
power output.

Model H1064PLS H1108PLS
Interface Characteristics

Fixed Port

4*10/100Base-TX PoE ports
2*10/100Base-TX uplink RJ45
ports (Data)

8*10/100Base-TX PoE ports
2*10/100Base-TX uplink RJ45 ports

Ethernet Port Port 1-6/1-10 can support 10/100Base-TX auto-detection, full/half-duplex


MDI/MDI-X auto-sensing

Functional Switch

1*(Extend+ VLAN)
Note: when the switch state changes, it must be restarted before the
PoE switch function can take effect

Twisted Pair

10BASE-TX: Cat5 or later UTP(≤250 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)

Chip Parameter
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX,IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 1.6Gbps (Non-blocking) 2Gbps (Non-blocking)
Rate@64byte 0.98Mpps 1.488Mpps
Buffer Memory 768K
Jumbo Frame 9.6K
LED Indicator Power:PWR (Green), network: L/A(Yellow), PoE: PoE (Green)

Functional switch: EXTEND (Green)

PoE & Power Supply
PoE Port Port 1-4 Port 1-8
Power Supply Pin Default 1/2(+), 3/6(-)
Max Power Per Port 30W, IEEE802.3af/at
Total PWR / Input
Voltage 65W/ (AC100-240V) 100W/ (AC100-240V)
Power Consumption Standby<3W, Full load <65W Standby <5W, Full load <100W
Power Supply Built-in power supply,
AC100~240V 50-60Hz 1A

Built-in power supply, AC100~240V
50-60Hz 2.0A

Physical Parameter
Operation TEMP /
Humidity -20~+55°C, 5%~90% RH Non condensing
Storage TEMP /
Humidity -40~+75°C, 5%~95% RH Non condensing
Dimension (L*W*H) 140*115*40mm 195*130*40mm
Net /Gross Weight <0.6kg / <1kg <0.8kg / <1.2kg
Installation Desktop, wall-mounted
Certification & Warranty
Lightning Protection Lightning protection: 4KV 8/20us; Protection level: IP30

/ Protection Level
Certification CCC, CE mark, commercial, CE/LVD EN60950

FCC Part 15 Class B, RoHS
Warranty 1 year, lifelong maintenance.


There are no reviews yet.

Be the first to review “6-port 10/100Mbps PoE Switch”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Back to Top
Select your currency
AED United Arab Emirates dirham
Product has been added to your cart