fbpx
Home
Shop

10-port 10/100Mbps PoE Switch

OVERVIEW

The H1108PLS is a 10/100Mbps unmanaged PoE switch. it has 8*10/100M PoE ports and
2*10/100M uplink RJ45 ports. Port 1-8 can support IEEE802.3af/at standard PoE, single port PoE
power up to 30W, and the maximum POE output power is 100W. As a PoE power supply device,
it can automatically detect and recognize the power receiving equipment that meets the standard
and supply power through the network cable. It can supply power to POE terminal equipment
such as wireless AP, webcam, VoIP phone, video access control intercom, etc. through network
cable to meet the network environment that needs high-density PoE power supply. It is suitable
for hotels, campuses, factory quarters and small and medium-sized enterprises to form an
economy efficient network.
Unmanaged model, plug and play, no configuration, easy to use.

د.إ275.00

Buy Now Compare
Availability: In Stock
SKU:4978

FEATURE
10/100Mbps access, Dual RJ45 port uplink

1
◇ Provides 8*10/100Base-TX RJ45 ports and 2*10/100Base-TX RJ45 ports for flexible
networking and meets the networking requirements of various scenarios.
◇ All ports support non-blocking wire-speed forwarding for smoother transmission.
◇ Support IEEE 802.3x full-duplex flow control and Backpressure half-duplex flow control.
 Intelligent PoE power supply
◇ 8*10/100Base-TX RJ45 ports, meeting the needs of security monitoring, teleconferencing
system, wireless coverage, and other scenarios.
◇ IEEE 802.3af/at PoE standard, without damaging non-PoE devices.
◇ Priority system for PoE port, it will supply power to the high priority level port first when the
power budget is insufficient and avoid overwork of the device.

 Innovative function

◇ Long distance mode: When opening, the speed of port 1-8 is reduced to 10M. With the
existing twisted pair cable, the transmission limit of the twisted pair line can be broken, and
the transmission distance can reach 250 meters, on the other hand, It can solve the problem
of poor transmission caused by line aging.
◇ Video monitoring mode: When opening, Port 1-8 is isolated from each other but communicate
with port 9-10 to prevent DHCP conflicts, optimize port cache utilization, and reduce
broadcast storms.

 Stable and reliable, easy to use

◇ CCC,CE, FCC, RoHS.
◇ Plug and play, no configuration, simple and convenient.
◇ Low power consumption, galvanized steel casing, no fan.
◇ The user-friendly panel, it can show the device status through the LED indicator of PWR,
Link/Act, PoE.
◇ Self-developed power supply, high redundancy design, providing a long term and stable PoE
power output.

TECHNICAL SPECIFICATION
Model H1064PLS H1108PLS
Interface Characteristics
Fixed Port 4*10/100Base-TX PoE ports

(Data/Power)
2*10/100Base-TX uplink RJ45

8*10/100Base-TX PoE ports
(Data/Power)
2*10/100Base-TX uplink RJ45 ports

1

ports (Data) (Data)

Ethernet Port Port 1-6/1-10 can support 10/100Base-TX auto-detection, full/half-duplex

MDI/MDI-X auto-sensing

Functional Switch

1*(Extend+ VLAN)
Note: when the switch state changes, it must be restarted before the
PoE switch function can take effect

Twisted Pair
Transmission

10BASE-TX: Cat5 or later UTP(≤250 meter)
100BASE-TX: Cat5 or later UTP(≤100 meter)

Chip Parameter
Network Protocol IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
IEEE802.3u 100Base-TX,IEEE802.3x
Forwarding Mode Store and Forward(Full Wire Speed)
Switching Capacity 1.6Gbps (Non-blocking) 2Gbps (Non-blocking)
Forwarding
Rate@64byte 0.98Mpps 1.488Mpps
MAC 1K
Buffer Memory 768K
Jumbo Frame 9.6K
LED Indicator Power:PWR (Green), network: L/A(Yellow), PoE: PoE (Green)

Functional switch: EXTEND (Green)

PoE & Power Supply
PoE Port Port 1-4 Port 1-8
Power Supply Pin Default 1/2(+), 3/6(-)
Max Power Per Port 30W, IEEE802.3af/at
Total PWR / Input
Voltage 65W/ (AC100-240V) 100W/ (AC100-240V)
Power Consumption Standby<3W, Full load <65W Standby <5W, Full load <100W
Power Supply Built-in power supply,
AC100~240V 50-60Hz 1A

Built-in power supply, AC100~240V
50-60Hz 2.0A

Physical Parameter
Operation TEMP /
Humidity -20~+55°C, 5%~90% RH Non condensing
Storage TEMP /
Humidity -40~+75°C, 5%~95% RH Non condensing
Dimension (L*W*H) 140*115*40mm 195*130*40mm
Net /Gross Weight <0.6kg / <1kg <0.8kg / <1.2kg
Installation Desktop, wall-mounted

1
Certification & Warranty
Lightning Protection
/ Protection Level Lightning protection: 4KV 8/20us; Protection level: IP30
Certification CCC, CE mark, commercial, CE/LVD EN60950

FCC Part 15 Class B, RoHS
Warranty 1 year, lifelong maintenance.

DIMENSION

APPLICATION

1
ORDERING INFORMATION
Model Description

H1064PLS

Unmanaged PoE switch with 4*10/100M PoE ports and 2*10/100M uplink
RJ45 ports. Port 1-4 can support IEEE802.3af/at PoE standard. Adjust
function switch, Port 1-4 can support 10M/250m transmission. Built-in 65W
power supply.

H1108PLS

Unmanaged PoE switch with 8*10/100M PoE ports and 2*10/100M uplink
RJ45 ports. Port 1-8 can support IEEE802.3af/at PoE standard. Adjust
function switch, Port 1-8 can support 10M/250m transmission. Built-in 100W
power supply.

Note: The PoE switch is not included hanging ear by default and needs to be purchased
separately.

PACKING LIST

PACKING LIST

CONTENT QTY UNIT
10-port 10/100Mbps PoE switch 1 SET
AC Power Cable 1 PC
User Guide 1 PC
Warranty Card

Reviews

There are no reviews yet.

Be the first to review “10-port 10/100Mbps PoE Switch”
Review now to get coupon!

Your email address will not be published. Required fields are marked *

Back to Top
Select your currency
AED United Arab Emirates dirham
Product has been added to your cart