S6720-30L-HI-24S
Version Mapping
Table 4-172Ā lists the mapping between theĀ S6720-30L-HI-24SĀ chassis and software versions.
Appearance and Structure
1 |
Twenty-four 10GE SFP+ ports Applicable modules and cables:
|
2 |
Two 100GE/40GE QSFP28 ports Applicable modules and cables:
NOTE:
A QSFP28 optical port cannot be split into four 10GE ports. The default rate is 100 Gbit/s. |
3 |
Four 40GE QSFP+ ports Applicable modules and cables:
NOTE:
A 40GE QSFP+ optical port cannot be split into four 10GE ports. |
4 |
Power module slot 1 NOTE:
Applicable power modules:
|
5 |
Fan slot 1 NOTE:
Applicable fan module:Ā FAN-40HA-B Fan Module |
6 |
One console port |
7 |
One ETH management port |
8 |
ESN label NOTE:
You can draw it out to view the ESN and MAC address of the switch. |
9 |
One USB port |
10 |
Fan slot 2 NOTE:
Applicable fan module:Ā FAN-40HA-B Fan Module |
11 |
Power module slot 2 NOTE:
Applicable power modules:
|
12 |
Ground screw NOTE:
It is used with aĀ ground cable.
|
Port Description
10GE SFP+ port
100GE/40GE QSFP28 port
40GE QSFP+ port
Console port
ETH management port
Attribute |
Description |
---|---|
Connector type |
RJ45 |
Standards compliance |
IEEE802.3 |
Working mode |
10/100 Mbit/s auto-sensing |
Maximum transmission distance |
100 m |
In V200R012C00 and later versions, you can log in to the switch that contains the ETH management port for the first time through the ETH port. For details, see “First Login to a Switch” in theĀ Configuration Guide – Basic Configuration. If you have logged in to the device for the first time by pressing and holding the MODE button for 6 seconds or longer and saved the configuration, the default configuration on the ETH port will be cleared. In this case, you cannot log in to the switch for the first time through the ETH port. You are advised to log in to the switch for the first time through the ETH port.
USB port
USB flash drives from different vendors differ in model compatibility and drivers. If a USB flash drive cannot be used, try to replace it with another one from a mainstream vendor. Switches support a maximum of 128 GB USB flash drives.
Indicator Description
TheĀ S6720-30L-HI-24SĀ has the same types of indicators as theĀ S6720-50L-HI-48S. For details, seeĀ Indicator Description.
Power Supply Configuration
TheĀ S6720-30L-HI-24SĀ uses pluggable power modules. It can be configured with a single power module or double power modules for 1+1 power redundancy. Pluggable AC and DC power modules can be used together in the same switch.
Heat Dissipation
TheĀ S6720-30L-HI-24SĀ uses pluggable fan modules for forced air cooling. The airflow direction is front-to-rear.
This figure only shows the airflow direction and does not depict the actual device.
Technical Specifications
Table 4-178Ā lists technical specifications of theĀ S6720-30L-HI-24S.
Item |
Description |
---|---|
Memory (RAM) |
2 GB |
Flash |
1 GB in total. To view the available flash memory size, run theĀ display versionĀ command. |
Mean time between failures (MTBF) |
61.42 years |
Mean time to repair (MTTR) |
2 hours |
Availability |
> 0.99999 |
Service port surge protection |
NA |
Power supply surge protection |
|
Dimensions (H x W x D) |
|
Weight (with packaging) |
9.9 kg (21.83 lb) |
Stack ports |
|
RTC |
Supported |
RPS |
Not supported |
PoE |
Not supported |
Rated voltage range |
100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC |
Maximum voltage range |
90 V AC to 264 V AC, 47 Hz to 63 Hz -38.4 V DC to -72 V DC |
Maximum power consumption (100% throughput, full speed of fans) |
232 W |
Typical power consumption (30% of traffic load, tested according to ATIS standard) |
138 W |
Operating temperature |
0Ā°C to 45Ā°C (32Ā°F to 113Ā°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE:
When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1Ā°C (1.8Ā°F) every time the altitude increases by 220 m (722 ft.). |
Storage temperature |
-40Ā°C to +70Ā°C (-40Ā°F to +158Ā°F) |
Noise under normal temperature (27Ā°C, sound power) |
< 65 dB(A) |
Relative humidity |
5% to 95%, noncondensing |
Operating altitude |
0-5000 m (0-16404 ft.) |
Certification |
|
Part number |
02351MXR |
Reviews
There are no reviews yet.